- Diskmaker X For El Capitan Install
- Telecharger Diskmaker X El Capitan
- Diskmaker X For El Capitan 10
- Diskmaker X For El Capitan Free
When Apple introduced Yosemite, it changed the way it distributes operating systems for the Mac. Now, you can’t buy a copy of the Mac OS installer. That’s a problem if you have a limited broadband connection or metered broadband connection. You’ll need to create a portable offline installer in these situations.
- Download OS X El Capitan. Download DiskMaker X. Double-click on the.dmg file to open it and drag-and-drop the DiskMaker X app into the Applications folder. Now load DIskMaker X. When you load the app, it will ask you which version of OS X do you want to make a boot disk of. You can choose Mavericks, Yosemite and of course, El Capitan.
- เราต้อง Download Application OS X El Capitan 10.11.5 มาแล้ว สามารถ Download ได้ที่ App Store 2. Download Apllication DiskMaker X เพื่อทำการสร้างระบบการติดตั้ง OS X El Capitan บน USB Thumb drive เรานั่นเอง 3.
DiskMaker X Pro is DiskMaker X, on steroids. Provide the installers, name your disk DMX-Target and launch DiskMaker X Pro. Follow the instructions, copy your installers in the right folder, and within a few minutes, you’ll get a disk with every macOS / OS X installer. I tried DiskMaker but I had problems in creating the bootable disk. I bought a new pen drive and downloaded El Capitan in my Applications folder; I downloaded DiskMaker X 5, too and ran it. At the very beginning I had some problems when DiskMaker attempted to format pen drive before starting copying files into it (it refused to format.
Download or Purchase the Mac Operating System
The first step is to go to the App Store and search for the current operating system. Currently, that’s El Capitan. If it’s already installed on your Mac, the App store will warn you the operating system is already on your system. If it isn’t already installed or you didn’t purchase it on your current Mac, under El Capitan it will say
If you’d like to create an installer for an earlier operating system you purchased, you can still do that from the App Store. Go to the
The Easy Way: DiskMaker X
DiskMaker X is a free program that does the hard work of creating the USB installer. They do take donations, so if it’s helpful to you, you might throw some money in the tip jar.
After your open the program, it finds the operating system installers on your Mac. In this example, I’ll create an El Capitan installer. Next you’ll need an 8 GB or larger disk. This media can be a USB stick, but I use an SD card. Since most Macs that run Yosemite have an SD card slot, I think it’s easier.
DiskMaker confirms the disk you want to use for the installer. Then it warns you it needs to erase that disk. Confirm again you have the right disk and then click continue. After authenticating your Mac’s administrator name and password, a few minutes later you’ll have a complete installer.
The Hard Way: Terminal Commands
If you’re more comfortable with terminal than using a third-party program, it is possible to create the installer. You’ll need a disk formatted
After you put in the password, the media creation process begins.
Why Do You Need This?
If you can download it again, why waste a flash drive or an SD card? Ideally, your Mac has a recovery partition you can boot off of to repair problems. Sometimes that partition isn’t there. An offline installer includes disk utility so you can solve problems.
The most common reason though is if your Mac’s hard drive fails. If you only have one Mac, you won’t have an easy way to reinstall the operating system. Creating the installer in advance solves the problem.
This is true for Windows too:It’s handy to have a system repair/recovery disk for Windows 7, Windows 8, or Windows 10
Finally, if you want to reinstall your OS to troubleshoot problems, waiting for the installer takes a long time. When things don’t work, you probably wait for a download. If you’re on a slow connection, the download could take several hours.
Overall for the cost of one small USB flash drive or SD card, you can have the peace of mind that you can solve your Mac problems instantly.
ALSO SEE:5 Free Portable Antivirus Software for Windows to Fix PCs On the Go
The above article may contain affiliate links which help support Guiding Tech. However, it does not affect our editorial integrity. The content remains unbiased and authentic.
Read Next
How to Use the Summarize Tool on Mac
Want to get through lengthy assignments or documents quickly? Here's how to use the Summarize Tool on
Jul 24, 2015 Jesus Vigo shows you the easiest possible way to create a bootable USB installer for OS X El Capitan. At this year's WWDC, Apple announced the next iteration of OS X, version 10.11. Jun 20, 2015 Step 1: Connect the flash drive to your Mac Step 2: Download and install the latest version of DiskMakerX Step 3: Run DiskMakerX Step 4: Click Yosemite (10.10) since there is no option available for El Capitan currently Step 5: Click Select an Install file Step 6: In the Applications folder.
Sep 30, 2015 Once you've obtained all of the necessary materials, connect the USB drive to your Mac and run the Diskmaker X app. The app will offer to make installers for OS X 10.9, 10.10, and 10.11, and it. Create Bootable USB for Mac OS X El Capitan with TransMac A new pop up box will appear, click on the three-dots, and then select the macOS X El Capitan.DMG file from Windows. Then click on OK. Choose Mac OSX El Capitan DMG file. Sep 13, 2018 Bootable USB Installers for OS X Mavericks, Yosemite, El Capitan, and Sierra. First, review this introductory article: Create a bootable installer for macOS. Second, see this How To outline for creating a bootable El Capitan installer. Simply replace the Terminal command with the one from the preceding article by copying it into the Terminal.
Make El Capitan Usb Installer
Bootable USB Installers for OS X Mavericks, Yosemite, El Capitan, and Sierra
First, review this introductory article: Create a bootable installer for macOS. Second, see this How To outline for creating a bootable El Capitan installer. Simply replace the Terminal command with the one from the preceding article by copying it into the Terminal window. You will need an 8GB or larger USB flash drive that has been partitioned and formatted for use with OS X.
Drive Partition and Format
- Open Disk Utility in the Utilities' folder.
- After Disk Utility loads select the drive (out-dented entry with the mfg.'s ID and size) from the side list.
- Click on the Erase tab in the Disk Utility toolbar. Name the drive, 'MyVolume'. <---- IMPORTANT!
- In the drop down panel set the partition scheme to GUID. Set the Format type to Mac OS Extended (Journaled.)
- Click on the Apply button and wait for the Done button to activate. When it does click on it.
- Quit Disk Utility.
Create Installer
Open the Terminal in the Utilities' folder. Choose the appropriate command line (in red) depending upon what OS X installer you want. Paste that entire command line from below at the Terminal's prompt:
Command for macOS High Sierra:
sudo /Applications/Install macOS High Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install macOS High Sierra.app
Command for macOS Sierra:
Diskmaker X For El Capitan Install
sudo /Applications/Install macOS Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install macOS Sierra.app
Command for El Capitan:
sudo /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install OS X El Capitan.app
Command for Yosemite:
sudo /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install OS X Yosemite.app
Command for Mavericks:
Microsoft word for catalina mac. sudo /Applications/Install OS X Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume --applicationpath /Applications/Install OS X Mavericks.app
Press RETURN. You will be asked for your admin password. It will not echo to the Terminal window. Then press RETURN again. Wait for the return of the Terminal prompt signifying the process has completed. It takes quite some time to finish. Be patient.
Sep 13, 2018 1:16 PM
It was 2009 when Apple last released a new operating system on physical media. Things have proceeded remarkably smoothly since version 10.7 switched to download-only installers, but there are still good reasons to want an old, reliable USB stick. For instance, if you find yourself doing multiple installs, a USB drive may be faster than multiple downloads (especially if you use a USB 3.0 drive). Or maybe you need a recovery disk for older Macs that don't support the Internet Recovery feature. Whatever the reason, you're in luck, because it's not hard to make one.
As with last year, there are two ways to get it done. There's the super easy way with the graphical user interface and the only slightly less easy way that requires some light Terminal use. Here's what you need to get started.
- A Mac that you have administrator access to, duh. We've created El Capitan USB stick from both Yosemite and El Capitan, but your experience with other versions may vary.
- An 8GB or larger USB flash drive or an 8GB or larger partition on some other kind of external drive. For newer Macs, use a USB 3.0 drive—it makes things significantly faster.
- The OS X 10.11 El Capitan installer from the Mac App Store in your Applications folder. The installer will delete itself when you install the operating system, but it can be re-downloaded if necessary.
- If you want a GUI, you need the latest version of Diskmaker X app. Version 5 is the one with official El Capitan support.
- Diskmaker X is free to download, but the creator accepts donations if you want to support his efforts.
The easy way
Once you've obtained all of the necessary materials, connect the USB drive to your Mac and run the Diskmaker X app. The app will offer to make installers for OS X 10.9, 10.10, and 10.11, and it should run on OS X versions all the way back to 10.7—support for 10.6 was dropped in the most recent release.
Telecharger Diskmaker X El Capitan
Diskmaker X has actually been around since the days of OS X 10.7 (it was previously known as Lion Diskmaker), and it's still the easiest GUI-based way to go without intimidating newbies. If you're comfortable with the command line, it's still possible to create a disk manually using a Terminal command, which we'll cover momentarily.
Select OS X 10.11 in Diskmaker X, and the app should automatically find the copy you've downloaded to your Applications folder. It will then ask you where you want to copy the files—click 'An 8GB USB thumb drive' if you have a single drive to use or 'Another kind of disk' to use a partition on a larger drive or some other kind of external drive. Choose your disk (or partition) from the list that appears, verify that you'd like to have the disk (or partition) erased, and then wait for the files to copy over. The process is outlined in screenshots above.
The only slightly less-easy way
If you don't want to use Diskmaker X, Apple has actually included a terminal command that can create an install disk for you. Assuming that you have the OS X El Capitan installer in your Applications folder and you have a Mac OS X Extended (Journaled)-formatted USB drive named 'Untitled' mounted on the system, you can create an El Capitan install drive by typing the following command into the Terminal.
Mac does not have enough space for mojave. sudo /Applications/Install OS X El Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install OS X El Capitan.app --nointeraction
Diskmaker X For El Capitan 10
The command will erase the disk and copy the install files over. Give it some time, and your volume will soon be loaded up with not just the OS X installer but also an external recovery partition that may come in handy if your hard drive dies and you're away from an Internet connection.
Diskmaker X For El Capitan Free
Whichever method you use, you should be able to boot from your new USB drive either by changing the default Startup Disk in System Preferences or by holding down the Option key at boot and selecting the drive. Once booted, you'll be able to install or upgrade El Capitan as you normally would.